Instant thermostatic water supply
With the ceramic thermal heating system, the water temperature can always remain stable and the bacteria can not grow in the continuous flushing for a long time.
Confirmation of bathroom space
Installation is shown in the figure below: Make sure there is enough space in the bathroom
The distance between the water supply port and the wall is more than 25mm. If it does not meet the conditions, additional connection hoses may be required.
Can I install the product myself?
Yes, please read the instructions carefully before installing the product. If you encounter any problems during installation, please contact after-sales consultation. It is recommended that professional service personnel perform the installation. The accidents and losses caused by improper installation are borne by the user.
Manually clean the nozzle
Long press the water temperature button for 2 seconds, the nozzle is fully extended, the user manually cleans, and the toothbrush can be used to remove dirt or clogging impurities. Press the Stop button after completion and the nozzle will retract. If not operated, the nozzle will automatically return to position after 4 minutes.
How long is the life of the external filter?
The actual replacement cycle will vary depending on the area, water quality, season, or usage. When it is found that the cleaning intensity is weakened, please replace the filter in time. No foreign matter or corrosive substances can be found near the filter. The heat source (heater, bath light) that should be overheated during installation should be installed indoors, and it must not be installed in places where the sun is exposed to the sun or where freezing is cold.
How to clean and maintain the toilet lid?
Press and hold the disassembly button on the right side of the toilet lid to remove the toilet lid from the toilet and clean the connection. After the completion, the toilet lid is returned to the original flavor until the product is fixed and the disassembly button springs back.
Wipe the plastic part of the toilet lid with a damp cloth. Always wipe with water. If you do not remove the dirt in time, it will become difficult to clean. In addition, wiping with water can prevent static electricity from being generated, and static electricity can attract dust, causing the product to become black and dirty.
Voltage rating: 220V, 50Hz
Power rating: 1340W
Max power: 1500W
Heating type: instant hot
Water supply temperature: 4 – 40 Deg.C
Water pressure range: 0.08 – 0.75MPa
Waterproof rating: IPX4